Reecote EC014 - Solvent Based Epoxy Coating

Vendor: Virtus Resins
Reecote EC014 is based on a blend of epoxy resins, curing agents, mineral fillers and solvent. Reecote EC014 is supplied in pre-weighed containers to ensure correct on-site mixing. It is...

Available

With VAT: £94.80 | Without VAT:
£79.00
Size
Color
White
Beige
Yellow
Light Grey
Goosewing Grey
Storm Grey
Flint Grey
Black
Holly Green
Leaf Green
Elfin Green
Carnival Red
Tile Red
Tartan Blue
Cornflower Blue
Pigeon Blue
Coverage Calculator
Calculate

    Reecote EC014 is based on a blend of epoxy resins, curing agents, mineral fillers and solvent. Reecote EC014 is supplied in pre-weighed containers to ensure correct on-site mixing. It is available in a wide range of colours. It provides an attractive,dust free, chemical and abrasion resistant floor coating.

    Reecote EC014 is suitable for use where a dust free, hygienic, easy clean floor coating is required. The cured material provides resistance to a wide range of chemicals and industrial traffic. Suitable locations include warehouses, light industrial factories, garages, workshops etc.

    FeRFA Type

    Type 2

    Advantages

    • Good Chemical Resistance
    • Wide Colour Range
    • Good Abrasion Resistance
    • Fast Curing
    • Dust Free Surface

    Coverage

    168g/m² - Single application

    Approx. 35m² /coat.

    Two coats recommended.

    Curing Schedule

    Overcoating period is 24 hours, final drying time to foot traffic is 1 day, lighty serviceable is 2 days and fully serviceable is 7 days.

    Priming

    A primer not required with this product. A third coat may be required with some colours to achieve full opacity.

    Application Conditions:

    The storage, mixing and application conditions can affect the quality of the finished product. Please refer to our information Data sheet reference TD300.

    Surface Preparation:

    New concrete should have an RH% of 75% or less.
    The substrate should be clean, free from laitance, oil, grease or other agents, which may impair adhesion. Cleaning techniques may include acid etching, grinding, light mechanical scabbling, blasting or degreasing, depending on wall contamination.

    Existing concrete walls should be sound and free from loose material. Damaged areas should be repaired with a Reepare Mortar prior to the coating application.

    Mixing Instructions:

    IT IS IMPERATIVE THAT THE MIXING IS CARRIED OUT IN THE RESIN CONTAINER.

    Reecote EC014 is a two pack system and it is very important to ensure the curing agent, compound B, should be added to the entire contents of the resin pack, component A and stirred thoroughly until uniform colour is achieved (2-3 minutes).
    Packs should not be split unless accurate weighing facilities are available. Reecote EC014 is supplied in pre-weighed units of the correct proportions.

    Application:

    Apply the mixed material to the suitably prepared wall by brush or roller, ensure complete coverage of the wall area. Apply the second coat within 24 hours of the first. On very porous concrete a third coat may be required.

    Certain colours can be made to order subject to availability.

    BEIGE YELLOW HOLLY GREEN LEAF GREEN
    ELFIN GREEN CARNIVAL RED TILE RED STORM GREY
    FLINT GREY GOOSEWING GREY LIGHT GREY TARTAN BLUE
    CORNFLOWER BLUE PIGEON BLUE WHITE BLACK

    Technical Datasheets

    EC014 Datasheet

    data sheet download


    Safety Data Sheets


    EC014 Hardener

    data sheet download

    EC014 Resin

    data sheet download

    Related Product

    Best Sellers

    Suppliers & Partners