Reegrout EG1040 - Pourable Epoxy Grout
Vendor: Virtus Resins
Reegrout EG1040 is a free-flowing, self-levelling grout system, suitable for use where high strength, fast curing flow-applied grout is required. Ideal situations include grouting of holding down bolts and fixing, machine beds, holes and cavities in concrete etc.
- Rapid strength gain
- No shrinkage
- High bond strength
One unit covers 1m² @ 6mm.
Usable Life45 minutes @ 20°C
5 – 10 mm
All tool etc should be cleaned with standard thinner immediately after use. For hands - soap and water.
New concrete should have an RH% of 75% or less. The substrate should be clean, free from laitance, oil, grease or other agents, which may impair adhesion. Cleaning techniques may include acid etching, grinding, light mechanical scabbling, blasting or degreasing, depending on wall contamination.
IT IS IMPERATIVE THAT THE MIXING IS CARRIED OUT IN THE RESIN CONTAINER. Reegrout EG1040 is supplied in pre-weighed containers and no addition of solvents or aggregates should be carried out on site. All of the hardener should be added to the resin and mixed by drill with mixing attachment for 2 - 3 minutes or until a uniform colour is achieved. Pour the mixed material onto the prepared surface ensuring complete filling of the hole or void.
Apply the mixed material to the substrate and screed to the required level. Finish to a resin rich surface by steel trowel.
Safety Data Sheets
Reegrout EG1040 Component A
Reegrout EG1040 Component B