Reeprime EP550 - Moisture Tolerant Primer

Vendor: Virtus Resins
A moisture tolerant primer which acts as a moisture barrier. It is ideal for damp, problematic concrete substrates and poor quality concrete. It is for use with our Reeflor coatings...

Available

With VAT: £75.60 | Without VAT:
£63.00
Size

A moisture tolerant primer which acts as a moisture barrier. It is ideal for damp, problematic concrete substrates and poor quality concrete. It is for use with our Reeflor coatings

The main field of application is priming and as an adhesion promoter of problematic concrete substrates and poor quality concrete strengthening prior to the application of epoxy, urethane and MMA systems acting as a moisture barrier required when applying moisture sensitive systems.

Advantages

  • Excellent adhesion to wet concrete
  • Very good film surface
  • Solvent free
  • Slightly flexible properties
  • High mortar strength
  • Good curing performance at low temperatures
  • Excellent sealing properties
  • Good Penetration

Surface Preparation

Concrete moisture should not exceed 100%.The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Cleaning techniques may include, acid etching, grinding, light mechanical scabbling, blasting or degreasing, depending on floor contamination. Existing concrete floors should be sound and free from loose material.

Coverage

350-500g/m² - single application.

Overcoating Period

24 hours.

Surface Preparation:

Concrete moisture should not exceed 100%.The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Cleaning techniques may include, acid etching, grinding, light mechanical scabbling, blasting or degreasing, depending on floor contamination. Existing concrete floors should be sound and free from loose material.

Mixing:

IT IS IMPERATIVE THAT THE MIXING IS CARRIED OUT IN THE RESIN CONTAINER.

Reeprime EP550 is a twp-pack system and it is very important to ensure the curing agent and resin are thoroughly mixed together. The entire contents of curing agent (component B) should be added to the entire contents of the resin pack (component A), and stirred thoroughly.

Packs should not be split unless accurate weighing or measuring facilities are available.

Once mixed, Reeprime EP550 should be applied immediately Reeprime EP550 should be allowed to become tack free prior the application of Reeflor epoxy systems and touch-dry prior the application of urethanes or MMA resin to eliminate crosslink reaction. In all cases further applications must be carried out within 72 hrs.

Application:

Reeprime EP550 is applied to the prepared substrate by roller or brush ensuring continuous film. Avoid over application and puddles. Porous floors may require two coats of Reeprime EP550.

Technical Datasheets

Reeprime EP550

data sheet download

Safety Data Sheets


Reeprime EP550 Component A

data sheet download

Reeprime EP550 Component B

data sheet download

Related Product

Best Sellers

Suppliers & Partners