Reeprime EP800 - Low Viscosity Epoxy Primer

Vendor: Virtus Resins
Reeprime EP800 is based on a blend of epoxy resins and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties. Reeprime EP800...

Available

With VAT: £80.64 | Without VAT:
£67.20
Size

Reeprime EP800 is based on a blend of epoxy resins and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties.

Reeprime EP800 is designed for use on a variety of substrates. The substrate is primed prior to the application of Reeflor systems.

Advantages

  • Solvent Free
  • Low Viscosity - giving easy application
  • Excellent adhesion to a variety of substrates
  • Good "wetting out" and penetration properties
  • Low odour - suitable for food factories
  • Good curing performances at low temperatures

Surface Preparation

New concrete should have an RH% of 75% or less.The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Cleaning techniques may include, acid etching, grinding, light mechanical scarifying, blasting or degreasing, depending on floor contamination. Existing concrete floors should be sound and free from loose material.

Coverage

20-25m² per 5kg pack - single coat application.

Overcoating Period

24 hours.

Surface Preparation:

New concrete should have an RH% of 75% or less.

The substrate should be clean, free from laitence, oil, grease or other agents which may impair adhesion.

Cleaning techniques may include: acid etching, grinding, light mechanical scabbling, blasting or degreasing, depending on floor contamination. Existing concrete floors should be sound and free from loose material. Damaged areas should be repaired with a Reepare Mortar prior to the application of Reeprime EP800.

Mixing:

IT IS IMPERATIVE THAT THE MIXING IS CARRIED OUT IN THE RESIN CONTAINER.

Reeprime EP800 is a two-pack system and it is very important to ensure the curing agent and resin are thoroughly mixed together. The entire contents of the curing agent, component B, should be added to the entire contents of the resin pack, component A, and stirred thoroughly.

Packs should not be split unless accurate weighing facilities are available. Reeprime EP800 is supplied in pre-weighed units of the correct proportions. Once mixed Reeprime EP800 should be applied immediately.

Reeprime EP800 should be allowed to become tack free prior the application of Reeflor or Reecote systems.

Application:

Reeprime EP800 is applied to the prepared substrate by roller or brush ensuring continuous film. Avoid over-application and puddles. Porous floors may require two coats of Reeprime EP800.

The storage, mixing and application conditions can affect the quality of the finished product. Please refer to our Information Data sheet reference TD300.

Technical Datasheets

Reeprime EP800

data sheet download

Related Product

Best Sellers

Suppliers & Partners