Aquaproof Safe
Vendor: Virtus Resins
Aquaproof Safe - solvent based waterproof roofing coating. Aggregated for application on high level walkways and gutters as a safety measure. Waterproofs roofs instantly, ideal for general maintenance work. Ready to use, just one coat gives instant protection – even rainfall immediately after application has no adverse effect.
Advantages
- Works instantly
- Ready to use
- Aggregated for application on high level walkways and gutters as a safety measure
- Particularly suitable for general maintenence work
- Rainfall immediately after application has no adverse effect
- Solvent based
- Weatherproof
- Exterior
- Anti-Slip
Finish
Aggregated textured waterproof finish.
Colour
Grey, Black and solar reflective White, other colours to order
Pack Size
5kg and 20kg containers
Suitable Substrates
Concrete, brick and stone, slates, tiles, asphalt – please see data sheet for full details.
Type
Acrylic solvent-based
Components in the System
One ready-to-use container.
Application
Roller, brush or squeege applied.
Primer
Most roofing substrates to be treated will not normally require priming. Ready for use on flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt and metal (galvanised and ferrous). Other substrates may require Aquaproof Primer, please see Technical Data sheet.
Coverage
Approximately 1 kg per square metre dependent on substrate.
Application:
To the dry and cleaned surface , apply a generous coat of Aquaproof Safe Waterproof Roof Coating by brush, roller or squeegee, at the minimum specified spreading rate as stated above under the heading. Application Temperature should be between 5°C-25°C.
Please see technical guides for particular surfaces
BLACK | GREY | WHITE |
Technical Datasheets
Aquaproof Technical Data Sheet
Safety Data Sheets
Aquaproof Safety Advice