Flowshield Eco

Vendor: Virtus Resins
Flowshield Eco offers protection for porous exterior walls, paving, roof tiles and exterior wood. Flowshield Eco impregnates surfaces for superior water repellency and resistance to dirt, stains and grime using...

Available

With VAT: £0.00 | Without VAT:
£0.00
Size

Flowshield Eco offers protection for porous exterior walls, paving, roof tiles and exterior wood. Flowshield Eco impregnates surfaces for superior water repellency and resistance to dirt, stains and grime using the latest Fluorocarbon Technology. It enhances the durability of the building substrate, fully allowing the surface to ‘breathe’, whilst providing superior water repellence, stain repellence and maintaining longer lasting, cleaner surface.

Suitable Surfaces

Designed to provide an invisible waterproof protection to porous exterior walls (brickwork, stonework, cement rendering, clay roof tiles, exterior wood treated with preservative etc).

Advantages

  • Superior water repellence
  • Excellent stain
  • UV, chemical and abrasion resistant
  • Resistant to dirt, atmospheric pollution, weathering and delays aging
  • Prevents moss and algae growth
  • Permeable to water vapour (breathable)
  • Maintains freeze thaw characteristics
  • Reduces efflorescence
  • Natural finish obtained
  • Solvent free
  • One coat application - reduced labour cost
  • Up to 10 years product performance

Typical Installations

  • Exterior
  • Anti-Graffiti
  • Weather-shield (waterproof and UV-resistance)

Pack Size

5L and 15L plastic containers.

Colour

Clear once cured.

Surface Preparation

It is very important that the surface is dry and free from mould growth, dirt and grease. Algae or fungal deposits should first be removed by power washing the surface and then coat with Virtu’s Fungicidal Wash Solution. Allow to dry thoroughly before applying Flowshield Eco.

Usage

Outdoor (exterior)

Resistant To

Water, UV-rays and wide range of chemicals.

Coverage

Consult TDS for specific substrates.

Coats Required

Apply one flood coat application to saturation point. No coating should be carried out when the substrate temperature is below 5°C or above 35°C. NOTE: On very highly porous substrates a 2 coat wet on wet application may be required to obtain maximum performance.

Drying Time

Depending upon the outside ambient curing temperature: 1-2 hours touch dry and full cure achieved in 7 days.

Clear once cured

Technical Datasheets/h4>

Flowshield Eco Technical Data Sheet

data sheet download

Related Product

Best Sellers

Suppliers & Partners