Chemdur - Chemical Resistant Paint

Vendor: Virtus Resins
Chemdur is a two pack, chemical resistant paint suitable for floors and walls available in a gloss, silk or matt finish. It offers excellent protection from a wide range of...

Available

With VAT: £72.00 | Without VAT:
£60.00
Size
Color
Black
Charcoal
Dark Grey
Mid Grey
Light Grey
Platinum
Steel
Slate
Midnight Blue
Chelsea Blue
Mid Blue
Light Blue
Safety Red
Tile Red
Light Green
Green
Yellow
Sahara
Safety Yellow
Buff
White
Coverage Calculator
Calculate

    Chemdur is a two pack, chemical resistant paint suitable for floors and walls available in a gloss, silk or matt finish. It offers excellent protection from a wide range of chemicals.

    Chemdur is an aliphatic solvent-based UV stable polyurethane coating. The cured coating has excellent abrasion and chemical resistance and exhibits excellent weathering properties. The coating is particularly effective against Skydrol and has been used extensively in the aviation industry for hangar floors and walls.

    Suitable Surfaces

    Concrete, Render, Brick, Plasterboard, Steel and Aluminium. N.B: For plasterboards, one generous coat of Strongcoat V is required.

    Benefits & Features

    • Excellent adhesion
    • Hygienic sterile finish
    • Highly chemical resistant
    • An economical floor and wall coating;
    • 100% UV stable and will not change colour over time;
    • Suitable for outdoor use;
    • Barrier against heavy rain
    • Protects against graffiti and damage caused by the removal of graffiti (gloss version only);
    • Protects Chemical resistant including Skydrol;
    • Protects aluminum and steel from corrosion;
    • Ideal for outdoor line marking and demarcation;
    • Can be used as a chemical resistant top coat in decorative flake systems;
    • Can be used as a top coat on epoxy flooring to prevent colour change.
    • Complies with F.D.A regulations for food process machinery in that they do not yellow or support bacterial growth.
    {{ 16 | divided_by: 4 }}

    Mixing

    Prior to mixing, the temperature both components should be between 15 and 20 ºC. Add the hardener component to the coloured resin component and mix using a low speed electric mixer (300 - 400 rpm) for at least 3 minutes until homogeneous. Keep the mixing paddle fully submerged to avoid the entrapment of air and scrape the sides and bottom of the vessel several times.

    Important: Both liquids are pre-weighed and designed to be mixed together in their entirety. It is essential that the full amounts are mixed together and until homogenous to ensure the product cures correctly and to the desired finish.

    Application

    Can be applied by brush, short-nap roller or spray. Distribute the mixture immediately onto the surface using solvent resistant short nap lint-free mohair roller. Plan the work area to ensure a constant wet edge and work within the working time of the material. It is imperative that film thickness is kept constant, especially with silk coatings to maintain consistency of appearance. This should be regularly checked using a wet film thickness wheel.

    Ensure that material is not applied more than once or overlapped in any area and apply in one direction only. If the thickness of the applied material is uneven, the surface may have an uneven appearance due to differences in gloss. Avoid pooling as this will lead to solvent entrapment and un-cured areas.
    Do not apply subsequent coats until the previous coat is cured. This will depend on temperature, atmospheric humidity and degree of ventilation. Adequate ventilation and air movement is necessary.
    Do not apply subsequent coats until the previous coat is cured. This will depend on temperature, atmospheric humidity and degree of ventilation. Adequate ventilation and air movement is necessary.
    If applying by spray, suitable respiratory protective equipment should be worn by all exposed persons. Where specified, apply Chemdur Undercoat evenly at the coverage rate determined by trials. If, when cured, there are dry patches, a further coat may be required.

    Certain colours are subject to availability


    BLACK CHARCOAL MID GREY DARK GREY
    LIGHT GREEN GREEN CHELSEA BLUE MIDNIGHT BLUE
    LIGHT GREY PLATINUM STEEL SLATE
    SAFETY RED TILE RED SAHARA YELLOW
    LIGHT BLUE MID BLUE SAFETY YELLOW BUFF
    WHITE

    Technical Datasheets

    pdf-icon1.png

    Gloss Hardener Safety Datasheet

    Safety Datasheet Download

    Gloss Resin Safety Datasheet

    Safety Datasheet Download

    Silk Hardener Safety Datasheet

    Safety Datasheet Download

    Silk Resin Safety Datasheet

    Safety Datasheet Download

    Related Product

    Best Sellers

    Suppliers & Partners