Reeflor EL300 AS - Static Dissipative Floor Topping

Vendor: Virtus Resins
Reeflor EL300 AS is  static dissipative epoxy based floor topping, installed between 3-4mm thickness. Typical Installations Reeflor EL300 AS is based on a blend of epoxy resins, curing agents and...

Available

With VAT: £276.00 | Without VAT:
£230.00
Size
Color
Beige
Yellow
Holly Green
Leaf Green
Irish Green
Carnival Red
Tile Red
Blue Grey
Flint Grey
Squirrel Grey
Goosewing Grey
Light Grey
Tartan Blue
Cornflower Blue
Pigeon Blue
White
Black

Reeflor EL300 AS is  static dissipative epoxy based floor topping, installed between 3-4mm thickness.

Typical Installations

Reeflor EL300 AS is based on a blend of epoxy resins, curing agents and selected fine aggregates. All components are pre-batched and supplied pre-weighed to ensure consistent batching of materials.

Reeflor EL300 AS is suitable for use in areas where a build up of static electricity may lead to damage of sensitive electrical equipment or explosion of dust or solvents. Reeflor EL300 AS provides a seamless, hygienic, hard wearing finish with excellent resistance to heavy traffic.

Advantages

  • Self smoothing
  • Easy to clean
  • Wide colour range
  • Good chemical resistance
  • Hard wearing

Coverage

39.00 kg unit will cover up to 8.3  @ 4mm thick.

Priming

Priming will need to be carried out using Reeprime CPS900 prior to application of Reeflor EL300 AS. 

Curing Schedule

  • Drying times for foot traffic - 1 day
  • Lightly serviceable - 2 days
  • Fully serviceable - 7 days.

Application Conditions:

Reeflor EL300 A/S is supplied to approved contractors, only.

Application Conditions:

It is imperative that the application is carried out in accordance with the instructions. The temperature must not be allowed to drop below 5°C or exceed 30°C during application and the first stage of curing (i.e. 8hrs from application). Below 5°C and the finished system will be too conductive and above 30°C the system will be too insulative. Ensure the client is aware not to clean the surface with liquids of any kind before a 72hr curing is allowed. Doing so may affect the appearance to the finished surface.

Priming:

Priming must be carried out with Reeprime CPS900.

Certain colours can be made to order subject to availability.

BEIGE YELLOW HOLLY GREEN LEAF GREEN
ELFIN GREEN CARNIVAL RED TILE RED STORM GREY
FLINT GREY GOOSEWING GREY LIGHT GREY TARTAN BLUE
CORNFLOWER BLUE PIGEON BLUE WHITE BLACK

Technical Datasheets

Reeflor EL300 AS

data sheet download

Safety Data Sheets


Reeflor EL300 AS Resin

data sheet download

Reeflor EL300 AS Hardener

data sheet download

Related Product

Best Sellers

Suppliers & Partners