Strongcoat V Clear - High Build Wall Coating
Vendor: Virtus Resins
Strongcoat V Clear is a high build chemically resistant epoxy floor coating which provides the maximum protection in the minimum number of coats. Strongcoat V Clear exhibits high levels of...
Strongcoat V Clear is a high build chemically resistant epoxy floor coating which provides the maximum protection in the minimum number of coats. Strongcoat V Clear exhibits high levels of abrasion resistance and is used in conjunction with Virtus resin flooring to produce a continuous seamless finish onto vertical surfaces.
Appearance
Gloss clear smooth finish.
Surface Preparation
To be assured of maximum adhesion and properties from Virtus resin products, the correct surface preparation is essential. We recommend shotblasting to provide the floor with a key, and diamond grinding to remove previous coatings.
Primer
Strongcoat V Clear does not normally require a primer. When treating extremely weak or porous concrete it is advisable to prime with Flowprime SF.
Coverage
Approximately 0.125 kg per sqm per coat.
Cleaning
Regular cleaning is essential to enhance and maintain the life.
Thickness
150-200µm
Priming
Strongcoat ‘V’ does not normally require a primer . When treating extremely week or porous concrete it is advisable to prime with Flowprime SF.
Mixing
Add full contents of hardener container to full contents of resin container and mix with a slow speed stirrer for at least 2 minutes. Use a spatula to scrape the sides and bottom of the mixing vessel several times as unmixed material will result in uncured patches in the final finish.
Application
Apply by brush or medium pile simulated sheepskin roller working well into the surface taking care not to exceed the coverage rate.
Technical Datasheets
Strongcoat V Clear Technical Data Sheet
Safety Data Sheets
Strongcoat V Clear Resin
Strongcoat V Clear Hardener