Flowdur SL - Self-Smoothing Polyurethane Floor Topping

Vendor: Virtus Resins
Flowdur SL is a medium duty flow applied polyurethane floor topping for use on concrete and polymer modified cementitious screeds. Flowdur SL is designed with the highest order of durability,...

Available

With VAT: £128.04 | Without VAT:
£106.70
Size
Color
Cream
Ochre
Mustard
Flowdur Red
Green
Dark Blue
Dark Grey
Mid Grey
Coverage Calculator
Calculate

    Flowdur SL is a medium duty flow applied polyurethane floor topping for use on concrete and polymer modified cementitious screeds. Flowdur SL is designed with the highest order of durability, impact, abrasion and chemical resistance. Its easy to clean, smooth, matt finish makes the product ideal for environments such as the food, beverage, engineering and chemical industries.

    Appearance

    Seamless, smooth, matt finish.

    Features

    • Flow applied - rapid installation
    • High chemical resistance
    • Non-tainting and non-dusting
    • Seamless
    • High abrasion resistance
    • Easy to clean

    Thickness

    2 – 3 mm

    Coverage

    3.6 kg/m² at 2 mm or 5.4 kg/m² at 3 mm

    Curing Times

    Cure time to light pedestrian traffic is 12 hours, light wheeled traffic is 24 hours and heavy duty traffic is 48 hours.

    Application of Flowdur SL

    Prior to mixing, the temperature of the three components must be between 15 and 25 oC. Pre-mix the coloured resin component before use. Add the hardener component to the coloured resin component and mix using a low speed electric mixer (300 - 400 rpm) for 1 - 2 minutes until homogeneous.

    Decant the mixture into a rotary drum mixer and add the aggregate component in stages, mixing for a minimum of 3 minutes until a uniform coloured, lump-free mix is obtained. Apply the mixture immediately onto pre-primed areas , level to the required thickness using a steel float then de -aerate using a spiked roller.

    Spiked rolling should be carried out within three minutes of application in order to avoid interfering with flow and surface finish. Ensure that anchor grooves are fully wetted out with material. The cured product should be protected from other trades using Kraft paper or similar breathable material. Polythene should not be used. Protect the installed floor from damp, condensation and water for at least 4 days.

    Certain colours can be made to order subject to availability.

    CREAM OCHRE MUSTARD RED
    GREEN DARK BLUE MID GREY DARK GREY

    Technical Datasheets

    Flowdur SL Technical Data Sheet

    data sheet download


    Safety Data Sheets


    Flowdur SL Hardener

    data sheet download

    Flowdur SL Resin

    data sheet download

    Flowdur SL Aggregate

    data sheet download

    Related Product

    Best Sellers

    Suppliers & Partners