Flowepoxy - Epoxy Self-Leveller

Vendor: Virtus Resins
Medium-duty flow-applied epoxy flooring with self-smoothing properties. Seamless, smooth, gloss finish. Synthetic resin flooring will generally follow the profile of the underlying substrate because of their method of application and...

Available

With VAT: £178.80 | Without VAT:
£149.00
Size
Color
Black
Charcoal
Dark Grey
Mid Grey
Slate
Light Grey
Platinum
Steel
Light Green
Green
Safety Red
Tile Red
Midnight Blue
Chelsea Blue
Light Blue
Mid Blue
Sahara
Yellow
Safety Yellow
Buff
White
Coverage Calculator
Calculate

    Medium-duty flow-applied epoxy flooring with self-smoothing properties. Seamless, smooth, gloss finish. Synthetic resin flooring will generally follow the profile of the underlying substrate because of their method of application and their relatively low thickness.

    Pack Size

    31 kg pack comprising of: resin, hardener, and aggregate components.

    Suitable Surfaces

    Concrete and polymer modified cementitious screeds.

    Typical Installations

    • Food and beverage
    • Retail and car showrooms
    • Chemical industries
    • Schools
    • Hospitals
    • Hotels

    Options

    • Standard
    • ESD (Anti-static)

    Advantages

    • Flow applied - rapid installation
    • Resistant to general chemical spillages
    • Non-dusting
    • Seamless
    • High wear & abrasion resistance
    • Easy to clean

    Usage

    Indoor (some colour change would occur if used outdoors)

    Chemical Resistance

    Resistant to: A range of acids and other chemicals.

    Temperature Resistance

    Flowepoxy is resistant to to cleaning up to 60 degrees.

    Thickness

    2mm or 3mm as required.

    Coverage

    8.47  per unit at 2 mm.

    5.65  per unit at 3 mm.

    Drying Time

    Normally 24 hours @ 20 degrees to light pedestrian traffic.

    Cleaning

    Flowepoxy can be easily cleaned using industry standard cleaning chemicals and techniques.

    Primer

    Flowepoxy requires priming with 2 coats  Flowprime SF. If the substrate is newly laid, you may require 2 coats of Flowprime DPM (depending on residual moisture levels).

    Mixing

    Prior to mixing, the temperature of the three components must be between 15 and 25 oC. Pre-mix the coloured resin component before use. Add the hardener component to the coloured resin component and mix using a low speed electric mixer (200 - 500 rpm) for 1 - 2 minutes until homogeneous. Decant the mixture into a suitable mixing vessel and gradually add the aggregate component whilst continuing the mixing action. When all the aggregate has been added, mix for a minimum of 3 minutes until a uniform coloured, lump-free mix is obtained. Care should be taken to ensure that any material adhering to the sides, bottom and corners of the mixer is thoroughly blended in. Unduly extended or vigorous mixing should be avoided in order to minimize air entrainment.

    Application

    Priming: Priming should be carried out using Flowprime SF at 5 - 8 m2 /kg depending on substrate porosity. Apply using a medium nap roller ensuring complete coverage and avoiding pooling. If, when cured, there are dry patches, a further primer coat is required. Allow to cure completely before proceeding. If the primer has been left to cure for >48 hours then the primer surface should be mechanically abraded and the area re-primed. Failure to do so may result in pin-holing of the surface topping.

    Application of Flowepoxy: Apply the mixture immediately onto pre-primed areas, spread to the required thickness using a steel float then de-aerate using a spiked roller. Continue spiked rolling until air is released finishing well before the material begins to gel. The cured product should be protected from other trades using Kraft paper or similar breathable material. Polythene should not be used.

    Certain colours are subject to availability


    BLACK CHARCOAL MID GREY DARK GREY
    LIGHT GREEN GREEN CHELSEA BLUE MIDNIGHT BLUE
    LIGHT GREY PLATINUM STEEL SLATE
    SAFETY RED TILE RED SAHARA YELLOW
    LIGHT BLUE MID BLUE SAFETY YELLOW BUFF
    WHITE

    Technical Datasheets

    Flowepoxy Technical Data Sheet

    data sheet download


    Safety Data Sheets


    Flowepoxy Hardener

    data sheet download

    Flowepoxy Aggregate

    data sheet download

    Flowepoxy Resin

    data sheet download

    Related Product

    Best Sellers

    Suppliers & Partners